Treatments

Creams
Electric shavers
Electrolysis
Flash lamp
Friction
Laser
Oral medications
Rotary epilators
Shaving razors
Sugaring
Threading
Tweezing
Waxing

The Hair Facts Directory

Find a professional specialist or a product and equipment supplier in your area:
     Hair Removal Directory

To advertise here, contact us at: Marketing@TheHairFacts.com

Frequently Asked Questions

Using electric shavers Types and maintenance

Current Research

We are currently researching the effectiveness of non-prescription creams. If you have any information you would like to share with us please contact us: Research@TheHairFacts.com
This site is Double-A compliant with the W3C Web Content Accessibility Guidelines 1.0 - www.w3.org

types and maintenance FAQs

Here's a review of some of your frequently asked questions that relate to the types and maintenance of electric shavers, for both men and women:

Which are best - razors or electric shavers?

The short answer is: 'it depends'. You can generally get a closer shave with a razor than with an electric shaver. However, razors are also more likely to cause ingrown hairs and cuts. Electrical shavers are not as messy but they are more expensive to buy (initially). This really is an individual choice depending on many factors such as, ease of use, speed of shave, skin type, hair type and cost. Have a go with both types but remember that your face will take up to 3 weeks to get used to the way an electric device works.

Which is best - foil or rotary?

Let's first review the differences between the 2 systems. Rotary shavers are devices whose cutting system is based upon a rotating disc of blades that move under a slotted head. Foil shavers are devices that use an oscillating (back and forth) motion to cut hairs using a foil (screen) and cutter (blade) system. No system is 'better' than the other. It is down to the individual and their personal preference. Very few users can get equally good results with both systems. Take advantage of 1 of the numerous money-back guarantees, and give each one a try to see which suits you best.

Which is best - rechargeable or cord shaver?

Rechargeable and cord shavers are just as powerful as each other. A rechargeable shaver has the advantage in that you can shave anywhere, whereas the cord shaver usually lasts longer. A rechargeable battery is not likely to last for more than 5 years of continuous use.

What if I change brands?

If you are considering changing brands of electric shaver then be aware that it can take 1 or 2 weeks for your face to get used to new shavers. If you're changing between foil and rotary systems you will notice that one is better for you than the other.

Why doesn't my rechargeable battery last very long?

Some of the older types of battery need to be charged and discharged fully to preserve the life as they develop a charge-memory which shortens over time. The more recent types of battery are more flexible and don't incur this charge-memory. If you have the old type of battery in your shaver then follow these steps to cancel the charge-memory and bring new life to your battery:

  1. Discharge your battery by leaving the shaver running freely
  2. Recharge your battery completely
  3. Discharge your battery again by leaving the device running freely
  4. Recharge your shaver completely again (charge-memory should now have been maximised)
  5. Use the shaver daily without the cord until it runs all the way down
  6. Recharge the battery when dead
  7. Repeat steps 5 and 6 for a few months
  8. Repeat steps 1 to 4 every few months

If your battery dies halfway through a shave plug it in to finish your shave and then discharge it fully. Using rechargeable shavers whilst continuously plugged into the mains will shorten the life of your battery.

When your rechargeable battery is running low on charge you'll notice the noise level change. If the noise changes during a shave then complete your shave and discharge the battery fully. Once it's discharged you can recharge the battery so it's ready for your next shave; and doesn't run out halfway through.

How often should I change my cutters?

Most foil and rotary cutters need to be changed about once a year. Tough beards, rough handling, and poor maintenance will reduce the life span of the foil or rotary cutters. It is recommended that you change the foil (screen) at the same time as the cutter as the foil also deteriorates and becomes thinner. Putting a new cutter under a thinning foil may damage the foil, the new cutter, and, even worse - your skin.


 © TheHairFacts.com. All Rights Reserved.